Stop To Heat: Know The Steps To Install The Air Conditioning In Your Home

We can not deny it: air conditioning has become ‘one more’ between us. Whether we have it or not in our home, it is increasingly common to consider installing it and look for it urgently when we go out in the summer to eat or dine out of the house. Who does not like to be in a cool environment in the middle of summer? The air conditioning is comfortable, it provides a better rest and increases productivity in work environments . Come on, they are all advantages …

If you are considering putting it at home, we will tell you the steps that the expert usually takes in your installation, so, if in a very extreme case you need it, you can do it yourself. We start!

Where will you install it?

Remember that air conditioning is not always necessary in all rooms of the house or office . Let’s take the example of a home, of your home! Visualize it for a moment, what are spaces and corners where the heat does not become so extreme? In general, air conditioning is usually installed in the rooms where we spend more time and, therefore, concentrates more human heat; that is: room and living room or dining room. Folsom Air Conditioning always provides trained technicians to install AC.

The most commonly used is the so-called Split air conditioning, a domestic air conditioning system that requires an indoor unit installed and another, outside, in contact with the first. (If there are several devices, we would talk about a MultiSplit installation). What advantages does it have? Almost all. And disadvantages? You have to drill the wall and the installation involves a somewhat laborious process, but we are going to try to break it down below. Let’s first specify what we are looking for exactly.

We are clear that:

– We want to cool the house well

– That the power can be leveled up so as not to use ‘more than necessary’, that is, to be ecological

– That it be efficient or economical within what is possible.

With these premises in hand, choose, according to your budget and having previously informed, the ideal air conditioning for you. Next, choose the place where you are going to install it. Do you have it clear already? The Split type usually has a diffuser and a pump to install on the outside of the house. In addition, you have to take into account 2 locations, the right one to place the diffuser so that the cooling reaches the whole house and where to place the outside (you have to think it over, since it can no longer be placed on facades due to the risks that supposes).

Let’s do it!

Although each model usually has detailed instructions, what you have to do ‘yes or yes’ is to drill the wall slightly . Over there, you will pass the cables and the pipe that will reach the outside and make a bridge or connection. Now, you will place the support of the indoor unit in the chosen place. If you have thought about the living room wall, you probably want to place it on the sofa. Go ahead to possible later losses due to wear and place it at one end in such a way that you are not located just below the device(This way you will not be exposed directly to the air). It is good to use a level so that it is completely straight and square with your organizational scheme. Respect the decorative context of your wall and think about the details: sheets, pictures and other decorations that will occupy space next to the air conditioning box. Let everything have coherence!

Now, yes, yes!

– Make the hole that will connect indoor and outdoor units (you need concrete bits and use chisel and hammer to adjust it)

– Look at the instructions: it is time to pass the necessary cables and pipes through the hole

– Make sure the support is firm

And on the outside? How to place the outside part?

The most laborious part comes. We remind you once again that the help of an expert will come to you in this case, but you need to understand the whole process if that is not the case! On the outside of the chosen site, which can be a terrace or balcony, you will install the remaining unit. Many people opt for a gutter or box to hide the cables and that the result is more aesthetic. You may need tube twisters or tube stretchers for the rest of the process .

Take the outline and instructions of your unit and scrupulously follow the steps it dictates. Connect the pipes and make the electrical connections indicated. Of course, disconnecting beforehand any accessory electric current to not get any scare.

You’re done? Now we have to test if it works; plug in the device and check that everything is in order . If it is not, review, manual in hand, each stage and moment of the installation and check if you have left any step along the way

Types Of Roofing Materials

The beginning of construction should always start with some idea or development plan. Without this, you will not have a clear idea of ​​your desires, therefore, the erection process will continue for a long time.

It is necessary to understand that the roof is not only an ornament, but also protects your comfort from an external aggressive environment. Therefore, when selecting materials, it is necessary to clarify the objectives that will be adapted to you. A Roofing Company frequently supplies roofing materials.

As a general rule, in any private construction, the choice of the roof rests with the owner. In fact, all the constructive elements of the future structure depend on this. After all, if you buy a natural tile, whose mass is quite impressive, then you have to equip a system and a solid truss base. And that the colossal load flowed smoothly from one place to another, it is necessary to acquire reliable walls. You see, clinging one after the other, the appearance of the building is changing before our eyes.

As mentioned above, today there are many roofs, but you can distinguish the following:

  • Ondulin
  • Tiles (ceramic, bituminous, metal)
  • Asbestos and cement slate
  • Metal roofs

In addition to the main criteria for choosing a roof, there are many more nuances. For example, your region of residence and the roofing bias are the most important. Often, financially-funded developers try to pursue several goals: beautiful appearance and reliable protection.

As for temporary buildings, everything is simpler here. As a general rule, the dependencies are created for direct use, and not for admiration, so the materials that give beauty at the same time can be set aside and concentrate on those of quality. As an example, I can give several: galvanized metal sheets (without a polymer layer) and roofing material.

Despite the large amount of roofing, they are easily divided into three classes.

  1. Economic class . It includes products that do not differ in their beauty, but that have a reliable quality. The most popular are: slate, corrugated cardboard and ondulina
  2. The medium got executive class . It can be safely attributed to a soft roof and metal roofs. Surely, you already guessed that the extended surface of such products not only has a good waterproofing, but also provides an attractive view of the entire building.
  3. Then it follows premium class . The elite of roofing products gathered here. Brilliantly distinguished from this list you can call ceramic and copper tiles. Although metal is more suitable for the previous class, copper is an exception. Over time, it changes its color and only increases its characteristics

Thanks to modern materials, these edges have practically worn out and it is always possible to find an adequate alternative to this or that product.

Onduline Characteristics

In order for you to understand this material, I must make an introduction. Externally, wavelet is very similar to asbestos and cement slate, but it has smaller waves, located at a great distance from each other. The main raw material is natural cellulose mixed with bitumen and other additives. When adding several pigments to the product, the product receives a variety of gamma.

In the initial versions of Euroshafer, it had no other name, but over time, one of the companies started producing this coating with the Onduline brand. This name attracted all workers and stores, for what is now called the bitumen board.

The minimum deviation to place the Euroshade is 5 degrees, as for the maximum, it does not. Because ondulina is a kind of soft roof, it is necessary to rest on a solid base. It usually uses moisture-proof plywood, OSB boards or edge boards. If you prefer the latter option, then there is a need to select lumber in a single measure, otherwise you risk creating an uneven plane. The cover material placed on such a surface will deform and this will inevitably lead to leakage over time.

How To Choose The Best Roofing Material For The Roof. Types Of Roofing Material For The Roof. What Roof Is Best For The Home

If you decide to build a house, first of all you must decide on a design project and choose the right materials. Only after determining what the base, base, overlay and roof will be, can you start buying the necessary materials. It is important to decide on a choice of ceilings before construction, then will know with certainty about resistance of walls and foundations. But, how to choose the correct ceiling?

Types Of Roofing Materials

Of course, the requirements for the roof depend on the region of residence. For example, frost resistance is particularly relevant for northern areas, and noise isolation – for large cities. It is also necessary to take into account the durability and wear resistance of the material, since the roof is not manufactured for a decade. This element, perhaps, is one of the most important in the construction of a house. And, of course, it must be combined in style with the entire structure. When selecting the roof of your private home, we apply to the Moscow company “Stroymet”, the official site –

To facilitate the determination of the type of roof, you can pay attention immediately to the classification. At the moment, one can identify three basic types of roofing materials :

Economic Class Of Roofing Materials

If you want to save on construction without damaging the house, you can choose economy-class materials. Of course, they will not look as attractive as their more expensive “brothers”, but they also have their advantages.

Metal profiled sheets (corrugated sheet) differ not only in the presence or absence of a polymer coating, but also in the size of the waves. This durable material will last you a long time, since it has a high resistance to wear. Due to its flexibility, corrugated cardboard can be installed even in difficult sections of the roof. However, you need a slope of at least ten degrees. The sheets overlap, which increases the cost of the material. But the low cost of corrugated cardboard does not make this material deficient.

If we talk about the disadvantages of a roof of this type, it is worth noting the low noise insulation. Although the additional material (lining) is used for the laying, the audibility in the house is still very high.

The traditional slabs of asbestos and cement   practically ceased to be used in the construction of private houses. And this is a completely logical explanation. Low price and good resistance is, of course, an advantage. But slate is a very brittle material, it is easy to damage even during placement. In addition, in a few years, said roof will be saturated with moisture and will be an excellent place for the growth and reproduction of fungi and mosses. But the biggest drawback of the fiber cement slabs in one of the components. The fact is that asbestos is harmful to human health. Such savings in construction materials can involve serious costs for medications in a few years.

But there is another more modern version of the blackboard: ondulina . Bituminous leaves are sometimes called “flexible slate.” Since cellulose is used, and not asbestos, for its production, this material is completely safe for human health. Another advantage of the undulation is the ease of installation (as, in fact, the material itself). And a wide variety of colors will allow you to create a unique and unique design of your home. If we talk about the disadvantages, then they are enough. Ondulin is not suitable for homeowners in hot and cold areas, as this material is difficult to tolerate both frost and scorching sun. From the heat, the roof can even “drive”. In addition, ondulin is very flammable.

Roofing Materials For Business Class

Soft roof and metal tiles: an excellent compromise between technical parameters, appearance and price. But even these materials have their own characteristics, which must be taken into account when choosing a roof.

For example, metal tile looks like a real ceramic tile, however, it is a metal sheet with some texture. This roofing material has many advantages: durability, ease of installation, strength and light weight. But you should immediately consider the higher consumption of material, since the sheets overlap with an overlap of at least 25 centimeters. The use of metal leads to a familiar problem: poor insulation of noise.

But soft roof , which is sometimes called “bituminous shingles”, provides a high level of sound insulation without tools and additional materials. Due to the plasticity of the material, it can be stacked even in the most uncomfortable and intricate places. The durability is due to the roof’s resistance to corrosion and the appearance of rust. Soft roof TechnoNIKOLShinglas, which we bought for our house in the company “Stroymet” differs not only from good technical characteristics, but also from a wide palette of colors.

First Class Roofing Materials

Few will not notice the beauty and uniqueness of the ceramic tile ceiling . This material has many advantages: durability, frost resistance, high level of sound insulation, a wide variety of shapes and colors. But the production of this shingles is a complex and expensive process. As a consequence, the high price of the material. In addition, the great weight of the ceramic tiles forces to make a smaller step of the beams, which also affects the costs.

Several hundred years ago, the developers did not ask what roof to choose for the house. At that time, there were only a few specimens that fit any person, which can not be said for today. The modern production of building materials every year presents us with new products, and with them the construction technology of the building as a whole is changing.